BLWMT - SYNTHETIC DRYFALL ALKYD SEMI-GLOSS, 131-1 W
- MSDS: BLWMT
- Manufacturer: CORONADO PAINT COMPANY
- Product Name: SYNTHETIC DRYFALL ALKYD SEMI-GLOSS, 131-1 W
- National Stock Number: 8010-00N017720
Product Identification
Product ID:SYNTHETIC DRYFALL ALKYD SEMI-GLOSS, 131-1 W
MSDS Date:12/16/1987
FSC:8010
NIIN:00N017720
MSDS Number: BLWMT
Responsible Party
EDGEWATER, FL 32032
Emergency Phone: 904-428-6461
Info Phone: 904-428-6461
Cage: 33200
Contractor
Telephone: 904-428-6461
Cage: 33200
Ingredients
PIGMENTS
Fraction By Weight: 50.3%
VEHICLE
Fraction By Weight: 19.8%
ALIPHATIC NAPHTHA
Fraction By Weight: 29.9%
ACGIH TLV: 200 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DRYING OF SKIN, EYE IRRITATION.
EXCESSIVE INHALATION MAY CAUSE ANESTHESIA, HEADACHE, DIZZINESS,
NAUSEA, UPPER RESPIRATORY IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR, APPLY ARTFICIAL RESPIRATION
IF NECESSARY, CALL PHYSICIAN. SKIN: WASH WITH MILD SOAP AND WATER,
APPLY A MILD SKIN CREAM, IN SEVERE CASES CALL PHYSICIAN. EYE: FLUSH
WITH WATER FOR AT LEAST 15 MINUTES, CALL PHYSICIAN. INGEST: CALL
PHYSICIAN.
Fire Fighting
Flash Point Method:SCC
Flash Point:53.0F,11.7C
Lower Limits:1.1%
Upper Limits:7.0%
Extinguishing Media:FOAM, DRY CHEMICAL, CARBON DIOXIDE.
Fire Fighting Procedures:A NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:VAPORS MAY FORM EXPLOSIVE MIXTURES WITH
AIR.
Accidental Release
Spill Release Procedures:WASH WITH WATER INTO RETAINING AREA OR
CONTAINER. AVOID SPARKS, FIRE, OR HOT METAL SURFACES. SMALL
QUANTITIES MAY BE ABSORBED ONTO AN APPROPRIATE ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP COOL AND AWAY FROM SOURCES OF
IGNITION. USE WITH ADEQUATE VENTILTION. AVOID PROLONGED OR REPEATED
PERSONAL CONTACT.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:ABOVE TLV USE NIOSH/MSHA APPROVED CARTRIDGE
RESPIRATOR OR GAS MASK.
Ventilation:USE WHATEVER IS SUFFICIENT TO KEEP WORKROOM CONCENTRATION
BELOW TLV.
Protective Gloves:IMPERMEABLE GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:APRON, BARRIER CREAM.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:265F,129C
Vapor Pres:2
Vapor Density:4.1
Spec Gravity:1.324
Evaporation Rate & Reference:>1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE OPAQUE LIQUID, MINERAL SPIRITS ODOR.
Percent Volatiles by Volume:52.1
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CARBON
MONOXIDE AND DIOXIDE.
Disposal
Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS OR DISPOSE OF
ACCORDING TO APPLICABLE LOCAL, STATE, AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.